The Dyness DL5.0C is a home / residential (or small‑commercial) energy storage battery based on LiFePO₄ (lithium iron phosphate) chemistry.
Specifications
- <p class="ql-align-center"> <strong>Parameter</strong></p><p class="ql-align-center"> <strong>Value / Specification</strong></p><p> Battery Type</p><p> LiFePO₄ (Lithium Iron Phosphate) </p><p> Nominal Energy Capacity</p><p> 5.12 kWh </p><p> Nominal Capacity</p><p> 100 Ah </p><p> Nominal Voltage</p><p> 51.2 V </p><p> Operating Voltage Range</p><p> 44.8 V – 57.6 V </p><p> Recommended Charge/Discharge Rate</p><p> 0.5C </p><p> Maximum Continuous Discharge Rate</p><p> 1C </p><p> Recommended Charge/Discharge Current</p><p> **~ 50 A** </p><p> Max Continuous Charge Current</p><p> 75 A </p><p> Max Continuous Discharge Current</p><p> 100 A </p><p> Peak (Short‑Term) Discharge Current</p><p> 110 A (for up to 15 seconds) </p><p> Depth of Discharge (DoD)</p><p> ~ 90% (usable capacity) </p><p> Cycle Life</p><p> ≥ 6000 cycles (when used under standard test conditions) </p><p> Dimensions (W × D × H)</p><p> 558 × 545 × 150 mm </p><p> Net Weight</p><p> 54 kg </p><p> Operating Temperature (Charge)</p><p> 0 °C to +55 °C (with built-in heating function: operation down to –20 °C in some conditions) </p><p> Operating Temperature (Discharge)</p><p> –20 °C to +55 °C </p><p> Communication / Connectivity</p><p> CAN / RS485 / RS232 interfaces — allows integration with compatible solar inverters / energy management systems. </p><p> Scalability / Expansion</p><p> Supports up to 50 units in parallel (so system capacity can go from 5.12 kWh up to ~256 kWh) </p><p> Protection / Safety</p><p> Built‑in BMS with protections (over‑charge, over‑discharge, over‑current, temperature, cell balancing), LFP cell chemistry (safer than many lithium chemistries), safety certifications (e.g. UN38.3 / IEC / CE standards) </p><p> Installation / Mounting</p><p> Modular: can be wall-mounted, floor-standing or rack/stacked, depending on installation needs. </p><p> </p>
