It’s a UPS + inverter + charger unit. That means when the main power fails, it automatically switches to battery power (inverter mode) to supply alternating current (AC) electricity to your appliances — like lights, fans, TVs, etc.
Specifications
Model
Rapid+ 2500/24V
VA Rating
≈ 2300 VA (nominal)
Estimated “Bulb Load” Wattage
~1850 W ±3%
DC Input (Battery Bank)
24 V (usually 2 × 12 V batteries in series)
AC Output Voltage
220 V / 230 V AC (standard mains voltage output)
Output Frequency
50 Hz ± ~1% (or typical mains standard)
Waveform
Pure Sine Wave output — safe for sensitive electronics.
Battery Types Supported
TGEL, tubular, SMF, GEL, Lithium (various deep‑cycle battery types)
Charging Current
~15 A–20 A (battery charger)
Charging Technology
6‑stage charging (to prolong battery life)
Display
LCD (16 × 2) — shows status: voltage, load, battery level, alarms, etc.
Protections
Overload protection, short‑circuit protection, battery reverse-polarity protection, over‑voltage / under‑voltage protection, surge protection, MCB protection on mains input.
Automatic Bypass / Transfer Switching
Yes — when mains power is stable it uses mains; switches to battery/inverter on outage.
Generator Compatibility
Yes — can work with a generator supply if used alongside grid.
Typical Efficiency
~90–95% (depending on load and conditions)
Output Load Capacity
Suitable for typical home‑office / household loads like lights, fans, TVs, small‑to-medium appliances (as long as combined load ≤ ~1800 W–1850 W)
